Blockstream Jade is a hardware wallet that stores the recovery phrase for your Bitcoin and/or Liquid wallets offline for additional security. To set up your Jade with Blockstream Green on desktop, view our video guide or follow the instructions below. Desktop Setup 1. Open Blockstream Green and click the Blockstream logo under Devices. 2. Plug in the Jade to your desktop via the supplied USB cable. Select Update to make sure your Jade is using the latest firmware version. Tip: If Jade is not recognized by your computer, please visit the following help center guide. 3. In the Green desktop app, click Setup Jade on the network and security policy you would like to use, then continue through the initialization process on your Jade. Remember, each network and security policy will lead to a different wallet. Note: The security policy is listed under Type on the Jade login screen. If you are not sure whether to select Singlesig or Multisig Shield, please review our guide here. 4. Record the recovery phrase offline on paper (or by using a dedicated recovery phrase backup device for extra security). Then, verify your recovery phrase to make sure you have it written down correctly. Warning: Your recovery phrase is the only way to restore your wallet if you lose access to it (for example, you forget your PIN or lose your device). Blockstream never knows your recovery phrase and cannot help you restore your wallet if you lose it. 5. Set your six-digit PIN. This is used to unlock Blockstream Jade each time you login to your wallet. 6. Now, simply select Go to Wallet on the Green desktop app and you will see your wallet open on Blockstream Green. Blockstream Jade will also show that it is Ready! You can now use your Jade to send and receive Bitcoin transactions. After you have finished using your wallet, disconnect your Blockstream Jade from your device. Next time you want to use the wallet on Blockstream Jade, simply reconnect your device and follow the prompts.